Class LoadedRollingBearingDutyCycle

Inheritance
System.Object
System.MarshalByRefObject
SMT.MastaAPIUtility.MarshalByRefObjectPermanent
APIBase
LoadedBearingDutyCycle
LoadedNonLinearBearingDutyCycleResults
LoadedRollingBearingDutyCycle
LoadedBallBearingDutyCycle
LoadedNonBarrelRollerBearingDutyCycle
Implements
System.IEquatable<APIBase>
Inherited Members
SMT.MastaAPIUtility.MarshalByRefObjectPermanent.InitializeLifetimeService()
Namespace: SMT.MastaAPI.Bearings.BearingResults
Assembly: SMT.MastaAPI.13.0.dll
Syntax
public class LoadedRollingBearingDutyCycle : LoadedNonLinearBearingDutyCycleResults, IEquatable<APIBase>

Properties

AnalysisSettings

Declaration
public AnalysisSettingsItem AnalysisSettings { get; }
Property Value
Type Description
AnalysisSettingsItem

ANSIABMAAdjustedRatingLifeDamage

Proportion of the fatigue failure time that is experienced by the bearing i.e. 100% damage occurs at the time to fail. Adjusted Rating Life is defined in ANSI/ABMA 9:2015 and ANSI/ABMA 11:2014. It includes the life modification factors for reliability, special bearing properties, and operating conditions.

Measurement: Damage

Declaration
public double ANSIABMAAdjustedRatingLifeDamage { get; }
Property Value
Type Description
System.Double

ANSIABMAAdjustedRatingLifeReliability

The reliability requirement that would give 100% damage for the bearing. Adjusted Rating Life is defined in ANSI/ABMA 9:2015 and ANSI/ABMA 11:2014. It includes the life modification factors for reliability, special bearing properties, and operating conditions.

Measurement: Percentage

Declaration
public double ANSIABMAAdjustedRatingLifeReliability { get; }
Property Value
Type Description
System.Double

ANSIABMAAdjustedRatingLifeSafetyFactor

The allowable increase/decrease in load in order to get 100% damage. Calculated by converting the damage into a force relationship. Adjusted Rating Life is defined in ANSI/ABMA 9:2015 and ANSI/ABMA 11:2014. It includes the life modification factors for reliability, special bearing properties, and operating conditions.

Measurement: SafetyFactor

Declaration
public double ANSIABMAAdjustedRatingLifeSafetyFactor { get; }
Property Value
Type Description
System.Double

ANSIABMAAdjustedRatingLifeTime

Time before the first evidence of fatigue develops in the material of one of the rings or washers or one of the rolling elements based on the current loading and speed. Basic Rating Life is defined in ANSI/ABMA 9:2015 and ANSI/ABMA 11:2014. It does not include any life modification factors and so corresponds to a reliability of 10%.

Measurement: Time

Declaration
public double ANSIABMAAdjustedRatingLifeTime { get; }
Property Value
Type Description
System.Double

ANSIABMAAdjustedRatingLifeUnreliability

Failure rate for the bearing, i.e. 1 - Reliability. Adjusted Rating Life is defined in ANSI/ABMA 9:2015 and ANSI/ABMA 11:2014. It includes the life modification factors for reliability, special bearing properties, and operating conditions.

Measurement: Percentage

Declaration
public double ANSIABMAAdjustedRatingLifeUnreliability { get; }
Property Value
Type Description
System.Double

ANSIABMABasicRatingLifeDamage

Proportion of the fatigue failure time that is experienced by the bearing i.e. 100% damage occurs at the time to fail. Basic Rating Life is defined in ANSI/ABMA 9:2015 and ANSI/ABMA 11:2014. It does not include any life modification factors and so corresponds to a reliability of 10%.

Measurement: Damage

Declaration
public double ANSIABMABasicRatingLifeDamage { get; }
Property Value
Type Description
System.Double

ANSIABMABasicRatingLifeReliability

The reliability requirement that would give 100% damage for the bearing. Basic Rating Life is defined in ANSI/ABMA 9:2015 and ANSI/ABMA 11:2014. It does not include any life modification factors and so corresponds to a reliability of 10%.

Measurement: Percentage

Declaration
public double ANSIABMABasicRatingLifeReliability { get; }
Property Value
Type Description
System.Double

ANSIABMABasicRatingLifeSafetyFactor

The allowable increase/decrease in load in order to get 100% damage. Calculated by converting the damage into a force relationship. Basic Rating Life is defined in ANSI/ABMA 9:2015 and ANSI/ABMA 11:2014. It does not include any life modification factors and so corresponds to a reliability of 10%.

Measurement: SafetyFactor

Declaration
public double ANSIABMABasicRatingLifeSafetyFactor { get; }
Property Value
Type Description
System.Double

ANSIABMABasicRatingLifeTime

Time before the first evidence of fatigue develops in the material of one of the rings or washers or one of the rolling elements based on the current loading and speed. Basic Rating Life is defined in ANSI/ABMA 9:2015 and ANSI/ABMA 11:2014. It does not include any life modification factors and so corresponds to a reliability of 10%.

Measurement: Time

Declaration
public double ANSIABMABasicRatingLifeTime { get; }
Property Value
Type Description
System.Double

ANSIABMABasicRatingLifeUnreliability

Failure rate for the bearing, i.e. 1 - Reliability. Basic Rating Life is defined in ANSI/ABMA 9:2015 and ANSI/ABMA 11:2014. It does not include any life modification factors and so corresponds to a reliability of 10%.

Measurement: Percentage

Declaration
public double ANSIABMABasicRatingLifeUnreliability { get; }
Property Value
Type Description
System.Double

ANSIABMADynamicEquivalentLoad

Constant Dynamic equivalent load to give the same damage after the total number of cycles in the duty cycle

Measurement: Force

Declaration
public double ANSIABMADynamicEquivalentLoad { get; }
Property Value
Type Description
System.Double

ANSIABMADynamicEquivalentLoadSummary

Declaration
public DutyCyclePropertySummaryForce<BearingLoadCaseResultsLightweight> ANSIABMADynamicEquivalentLoadSummary { get; }
Property Value
Type Description
DutyCyclePropertySummaryForce<BearingLoadCaseResultsLightweight>

ISO2812007BasicRatingLifeDamage

Proportion of the fatigue failure time that is experienced by the bearing i.e. 100% damage occurs at the time to fail. Basic Rating Life is defined in ISO 281:2007 Sections 5-8. It does not include any life modification factors and so corresponds to a reliability of 10%.

Measurement: Damage

Declaration
public double ISO2812007BasicRatingLifeDamage { get; }
Property Value
Type Description
System.Double

ISO2812007BasicRatingLifeReliability

The reliability requirement that would give 100% damage for the bearing. Basic Rating Life is defined in ISO 281:2007 Sections 5-8. It does not include any life modification factors and so corresponds to a reliability of 10%.

Measurement: Percentage

Declaration
public double ISO2812007BasicRatingLifeReliability { get; }
Property Value
Type Description
System.Double

ISO2812007BasicRatingLifeSafetyFactor

The allowable increase/decrease in load in order to get 100% damage. Calculated by converting the damage into a force relationship. Basic Rating Life is defined in ISO 281:2007 Sections 5-8. It does not include any life modification factors and so corresponds to a reliability of 10%.

Measurement: SafetyFactor

Declaration
public double ISO2812007BasicRatingLifeSafetyFactor { get; }
Property Value
Type Description
System.Double

ISO2812007BasicRatingLifeTime

Time before the first evidence of fatigue develops in the material of one of the rings or washers or one of the rolling elements based on the current loading and speed. Basic Rating Life is defined in ISO 281:2007 Sections 5-8. It does not include any life modification factors and so corresponds to a reliability of 10%.

Measurement: Time

Declaration
public double ISO2812007BasicRatingLifeTime { get; }
Property Value
Type Description
System.Double

ISO2812007BasicRatingLifeUnreliability

Failure rate for the bearing, i.e. 1 - Reliability. Basic Rating Life is defined in ISO 281:2007 Sections 5-8. It does not include any life modification factors and so corresponds to a reliability of 10%.

Measurement: Percentage

Declaration
public double ISO2812007BasicRatingLifeUnreliability { get; }
Property Value
Type Description
System.Double

ISO2812007DynamicEquivalentLoad

Constant Dynamic equivalent load to give the same damage after the total number of cycles in the duty cycle

Measurement: Force

Declaration
public double ISO2812007DynamicEquivalentLoad { get; }
Property Value
Type Description
System.Double

ISO2812007DynamicEquivalentLoadSummary

Declaration
public DutyCyclePropertySummaryForce<BearingLoadCaseResultsLightweight> ISO2812007DynamicEquivalentLoadSummary { get; }
Property Value
Type Description
DutyCyclePropertySummaryForce<BearingLoadCaseResultsLightweight>

ISO2812007ModifiedRatingLifeDamage

Proportion of the fatigue failure time that is experienced by the bearing i.e. 100% damage occurs at the time to fail. Modified Rating Life is defined in ISO 281:2007 Section 9. It includes the life modification factors for reliability and systems approach.

Measurement: Damage

Declaration
public double ISO2812007ModifiedRatingLifeDamage { get; }
Property Value
Type Description
System.Double

ISO2812007ModifiedRatingLifeReliability

The reliability requirement that would give 100% damage for the bearing. Modified Rating Life is defined in ISO 281:2007 Section 9. It includes the life modification factors for reliability and systems approach.

Measurement: Percentage

Declaration
public double ISO2812007ModifiedRatingLifeReliability { get; }
Property Value
Type Description
System.Double

ISO2812007ModifiedRatingLifeSafetyFactor

The allowable increase/decrease in load in order to get 100% damage. Calculated by converting the damage into a force relationship. Modified Rating Life is defined in ISO 281:2007 Section 9. It includes the life modification factors for reliability and systems approach.

Measurement: SafetyFactor

Declaration
public double ISO2812007ModifiedRatingLifeSafetyFactor { get; }
Property Value
Type Description
System.Double

ISO2812007ModifiedRatingLifeTime

Time before the first evidence of fatigue develops in the material of one of the rings or washers or one of the rolling elements based on the current loading and speed. Modified Rating Life is defined in ISO 281:2007 Section 9. It includes the life modification factors for reliability and systems approach.

Measurement: Time

Declaration
public double ISO2812007ModifiedRatingLifeTime { get; }
Property Value
Type Description
System.Double

ISO2812007ModifiedRatingLifeUnreliability

Failure rate for the bearing, i.e. 1 - Reliability. Modified Rating Life is defined in ISO 281:2007 Section 9. It includes the life modification factors for reliability and systems approach.

Measurement: Percentage

Declaration
public double ISO2812007ModifiedRatingLifeUnreliability { get; }
Property Value
Type Description
System.Double

ISO762006RecommendedMaximumElementNormalStress

The Normal Stress which corresponds to an element deformation equal to 0.01% of the rolling element diameter

Measurement: Stress

Declaration
public double ISO762006RecommendedMaximumElementNormalStress { get; }
Property Value
Type Description
System.Double

ISOTS162812008BasicReferenceRatingLifeDamage

Proportion of the fatigue failure time that is experienced by the bearing i.e. 100% damage occurs at the time to fail. Basic Reference Rating Life is defined in ISO/TS 16281:2008 Sections 4 and 5. It does not include any life modification factors and so corresponds to a reliability of 10%.

Measurement: Damage

Declaration
public double ISOTS162812008BasicReferenceRatingLifeDamage { get; }
Property Value
Type Description
System.Double

ISOTS162812008BasicReferenceRatingLifeReliability

The reliability requirement that would give 100% damage for the bearing. Basic Reference Rating Life is defined in ISO/TS 16281:2008 Sections 4 and 5. It does not include any life modification factors and so corresponds to a reliability of 10%.

Measurement: Percentage

Declaration
public double ISOTS162812008BasicReferenceRatingLifeReliability { get; }
Property Value
Type Description
System.Double

ISOTS162812008BasicReferenceRatingLifeSafetyFactor

The allowable increase/decrease in load in order to get 100% damage. Calculated by converting the damage into a force relationship. Basic Reference Rating Life is defined in ISO/TS 16281:2008 Sections 4 and 5. It does not include any life modification factors and so corresponds to a reliability of 10%.

Measurement: SafetyFactor

Declaration
public double ISOTS162812008BasicReferenceRatingLifeSafetyFactor { get; }
Property Value
Type Description
System.Double

ISOTS162812008BasicReferenceRatingLifeTime

The allowable increase/decrease in load in order to get 100% damage. Calculated by converting the damage into a force relationship. Basic Reference Rating Life is defined in ISO/TS 16281:2008 Sections 4 and 5. It does not include any life modification factors and so corresponds to a reliability of 10%.

Measurement: Time

Declaration
public double ISOTS162812008BasicReferenceRatingLifeTime { get; }
Property Value
Type Description
System.Double

ISOTS162812008BasicReferenceRatingLifeUnreliability

Failure rate for the bearing, i.e. 1 - Reliability. Basic Reference Rating Life is defined in ISO/TS 16281:2008 Sections 4 and 5. It does not include any life modification factors and so corresponds to a reliability of 10%.

Measurement: Percentage

Declaration
public double ISOTS162812008BasicReferenceRatingLifeUnreliability { get; }
Property Value
Type Description
System.Double

ISOTS162812008DynamicEquivalentLoad

Constant Dynamic equivalent load to give the same damage after the total number of cycles in the duty cycle

Measurement: Force

Declaration
public double ISOTS162812008DynamicEquivalentLoad { get; }
Property Value
Type Description
System.Double

ISOTS162812008DynamicEquivalentLoadSummary

Declaration
public DutyCyclePropertySummaryForce<BearingLoadCaseResultsLightweight> ISOTS162812008DynamicEquivalentLoadSummary { get; }
Property Value
Type Description
DutyCyclePropertySummaryForce<BearingLoadCaseResultsLightweight>

ISOTS162812008ModifiedReferenceRatingLifeDamage

Proportion of the fatigue failure time that is experienced by the bearing i.e. 100% damage occurs at the time to fail. Modified Reference Rating Life is defined in ISO/TS 16281:2008 Section 7. It includes the life modification factors for reliability and systems approach.

Measurement: Damage

Declaration
public double ISOTS162812008ModifiedReferenceRatingLifeDamage { get; }
Property Value
Type Description
System.Double

ISOTS162812008ModifiedReferenceRatingLifeReliability

The reliability requirement that would give 100% damage for the bearing. Modified Reference Rating Life is defined in ISO/TS 16281:2008 Section 7. It includes the life modification factors for reliability and systems approach.

Measurement: Percentage

Declaration
public double ISOTS162812008ModifiedReferenceRatingLifeReliability { get; }
Property Value
Type Description
System.Double

ISOTS162812008ModifiedReferenceRatingLifeSafetyFactor

The allowable increase/decrease in load in order to get 100% damage. Calculated by converting the damage into a force relationship. Modified Reference Rating Life is defined in ISO/TS 16281:2008 Section 7. It includes the life modification factors for reliability and systems approach.

Measurement: SafetyFactor

Declaration
public double ISOTS162812008ModifiedReferenceRatingLifeSafetyFactor { get; }
Property Value
Type Description
System.Double

ISOTS162812008ModifiedReferenceRatingLifeTime

Time before the first evidence of fatigue develops in the material of one of the rings or washers or one of the rolling elements based on the current loading and speed. Modified Reference Rating Life is defined in ISO/TS 16281:2008 Section 7. It includes the life modification factors for reliability and systems approach.

Measurement: Time

Declaration
public double ISOTS162812008ModifiedReferenceRatingLifeTime { get; }
Property Value
Type Description
System.Double

ISOTS162812008ModifiedReferenceRatingLifeUnreliability

Failure rate for the bearing, i.e. 1 - Reliability. Modified Reference Rating Life is defined in ISO/TS 16281:2008 Section 7. It includes the life modification factors for reliability and systems approach.

Measurement: Percentage

Declaration
public double ISOTS162812008ModifiedReferenceRatingLifeUnreliability { get; }
Property Value
Type Description
System.Double

LambdaRatioInner

The ratio of the Minimum Lubricating Film Thickness (Inner) to the Combined Surface Roughness (Inner). This value is the minimum over all loaded bearings.

Declaration
public double LambdaRatioInner { get; }
Property Value
Type Description
System.Double

LambdaRatioOuter

The ratio of the Minimum Lubricating Film Thickness (Outer) to the Combined Surface Roughness (Outer). This value is the minimum over all loaded bearings.

Declaration
public double LambdaRatioOuter { get; }
Property Value
Type Description
System.Double

MaximumElementNormalStress

Measurement: Stress

Declaration
public double MaximumElementNormalStress { get; }
Property Value
Type Description
System.Double

MaximumElementNormalStressInnerSummary

Declaration
public DutyCyclePropertySummaryStress<BearingLoadCaseResultsLightweight> MaximumElementNormalStressInnerSummary { get; }
Property Value
Type Description
DutyCyclePropertySummaryStress<BearingLoadCaseResultsLightweight>

MaximumElementNormalStressOuterSummary

Declaration
public DutyCyclePropertySummaryStress<BearingLoadCaseResultsLightweight> MaximumElementNormalStressOuterSummary { get; }
Property Value
Type Description
DutyCyclePropertySummaryStress<BearingLoadCaseResultsLightweight>

MaximumElementNormalStressSummary

Declaration
public DutyCyclePropertySummaryStress<BearingLoadCaseResultsLightweight> MaximumElementNormalStressSummary { get; }
Property Value
Type Description
DutyCyclePropertySummaryStress<BearingLoadCaseResultsLightweight>

MaximumStaticContactStressDutyCycle

Declaration
public MaximumStaticContactStressDutyCycle MaximumStaticContactStressDutyCycle { get; }
Property Value
Type Description
MaximumStaticContactStressDutyCycle

MaximumTruncationSummary

Declaration
public DutyCyclePropertySummaryPercentage<BearingLoadCaseResultsLightweight> MaximumTruncationSummary { get; }
Property Value
Type Description
DutyCyclePropertySummaryPercentage<BearingLoadCaseResultsLightweight>

MinimumLambdaRatio

The ratio of the Minimum Lubricating Film Thickness to the Combined Surface Roughness. This value is the minimum over all loaded bearings and over each race.

Declaration
public double MinimumLambdaRatio { get; }
Property Value
Type Description
System.Double

MinimumLubricatingFilmThickness

Minimum of outer and inner minimum lubricating film thicknesses

Measurement: VeryShortLength

Declaration
public double MinimumLubricatingFilmThickness { get; }
Property Value
Type Description
System.Double

MinimumLubricatingFilmThicknessInner

Measurement: VeryShortLength

Declaration
public double MinimumLubricatingFilmThicknessInner { get; }
Property Value
Type Description
System.Double

MinimumLubricatingFilmThicknessOuter

Measurement: VeryShortLength

Declaration
public double MinimumLubricatingFilmThicknessOuter { get; }
Property Value
Type Description
System.Double

MisalignmentSummary

Declaration
public DutyCyclePropertySummarySmallAngle<BearingLoadCaseResultsLightweight> MisalignmentSummary { get; }
Property Value
Type Description
DutyCyclePropertySummarySmallAngle<BearingLoadCaseResultsLightweight>

SKFBearingRatingLifeDamage

Proportion of the fatigue failure time that is experienced by the bearing i.e. 100% damage occurs at the time to fail. This uses either the SKF GBLM Rating Life, for hybrid bearings, or the SKF Rating Life, for non-hybrid bearings.

Measurement: Damage

Declaration
public double SKFBearingRatingLifeDamage { get; }
Property Value
Type Description
System.Double

SKFBearingRatingLifeReliability

The reliability requirement that would give 100% damage for the bearing. This uses either the SKF GBLM Rating Life, for hybrid bearings, or the SKF Rating Life, for non-hybrid bearings.

Measurement: Percentage

Declaration
public double SKFBearingRatingLifeReliability { get; }
Property Value
Type Description
System.Double

SKFBearingRatingLifeTime

Time before the first evidence of fatigue develops in the material of one of the rings or washers or one of the rolling elements based on the current loading and speed. This uses either the SKF GBLM Rating Life, for hybrid bearings, or the SKF Rating Life, for non-hybrid bearings.

Measurement: Time

Declaration
public double SKFBearingRatingLifeTime { get; }
Property Value
Type Description
System.Double

SKFBearingRatingLifeUnreliability

Failure rate for the bearing, i.e. 1 - Reliability. This uses either the SKF GBLM Rating Life, for hybrid bearings, or the SKF Rating Life, for non-hybrid bearings.

Measurement: Percentage

Declaration
public double SKFBearingRatingLifeUnreliability { get; }
Property Value
Type Description
System.Double

StaticEquivalentLoadCapacityRatioLimit

Declaration
public double StaticEquivalentLoadCapacityRatioLimit { get; }
Property Value
Type Description
System.Double

WorstANSIABMAStaticSafetyFactor

Measurement: SafetyFactor

Declaration
public double WorstANSIABMAStaticSafetyFactor { get; }
Property Value
Type Description
System.Double

WorstISO762006SafetyFactorStaticEquivalentLoadCapacityRatio

Measurement: SafetyFactor

Declaration
public double WorstISO762006SafetyFactorStaticEquivalentLoadCapacityRatio { get; }
Property Value
Type Description
System.Double

Implements

System.IEquatable<T>

Extension Methods