Class ISO2812007Results

Inheritance

System.Object

System.MarshalByRefObject

SMT.MastaAPIUtility.MarshalByRefObjectPermanent

APIBase

ISOResults

ISO2812007Results

BallISO2812007Results

RollerISO2812007Results

Implements

System.IEquatable<APIBase>

Inherited Members

ISOResults._parent

ISOResults.LifeModificationFactorForReliability

ISOResults.ReportNames

ISOResults.OutputDefaultReportTo(String)

ISOResults.GetDefaultReportWithEncodedImages()

ISOResults.OutputActiveReportTo(String)

ISOResults.OutputActiveReportAsTextTo(String)

ISOResults.GetActiveReportWithEncodedImages()

ISOResults.OutputNamedReportTo(String, String)

ISOResults.OutputNamedReportAsMastaReport(String, String)

ISOResults.OutputNamedReportAsTextTo(String, String)

ISOResults.GetNamedReportWithEncodedImages(String)

APIBase.DisconnectFromMASTA()

APIBase.GetProperty<T>(String)

APIBase.SetProperty(String, Object)

APIBase.cacheRpds

APIBase.clearCachedRpds()

APIBase.getNamedObjectList<TElementType>(String)

APIBase.getExpandableProperty<TReturnType>(String)

APIBase.callPartialMethod(String, (T1, T2)<Type, Object>[])

APIBase.callPartialMethod<T>(String, T)

APIBase.callPartialMethod<T>(String, (T1, T2)<Type, Object>, T)

APIBase.callPartialMethod<T>(String, (T1, T2)<Type, Object>, (T1, T2)<Type, Object>, T)

APIBase.callPartialMethod<T>(String, (T1, T2)<Type, Object>, (T1, T2)<Type, Object>, (T1, T2)<Type, Object>, T)

APIBase.callPartialMethod<T1, T2>(String, (T1, T2)<Type, Object>, T1, T2)

APIBase.getPartialProperty(String)

APIBase.setPartialProperty(String, Object)

APIBase.IsValid(String)

APIBase.IsReadOnly(String)

APIBase.isInvalid

APIBase.DocumentationUrl()

APIBase.ToString()

APIBase.RunPython<T>(String, String, Object)

APIBase.RunPythonCode<T>(String, String, Object)

APIBase.RunPythonCode<T>(String)

APIBase.RunPython<T>(String, String)

APIBase.CreateObjRef(Type)

APIBase.RunPython(String, String, Object)

APIBase.createWrappedRange(Double, Double)

APIBase.createWrappedVector2D(Double, Double)

APIBase.createWrappedPosition3D(Double, Double, Double)

APIBase.Equals(APIBase)

APIBase.GetHashCode()

APIBase.Equals(Object)

SMT.MastaAPIUtility.MarshalByRefObjectPermanent.InitializeLifetimeService()

Namespace: SMT.MastaAPI.Bearings.BearingResults.Rolling.IsoRatingResults

Assembly: SMT.MastaAPI.13.0.dll

Syntax

public abstract class ISO2812007Results : ISOResults, IEquatable<APIBase>

Properties

AxialToRadialLoadRatio

The bearing axial load divided by the radial load. This ratio is used with the 'e' limiting value for dynamic equivalent load to determine the dynamic radial and axial load factors in ISO 281:2007.

Declaration

public double AxialToRadialLoadRatio { get; }

Property Value

Type	Description
System.Double

AxialToRadialLoadRatioExceedsISO2812007ELimitingValueForDynamicEquivalentLoad

The bearing axial load divided by the radial load exceeds the 'e' limiting value for dynamic equivalent load which is used to determine the dynamic radial and axial load factors in ISO 281:2007.

Declaration

public bool AxialToRadialLoadRatioExceedsISO2812007ELimitingValueForDynamicEquivalentLoad { get; }

Property Value

Type	Description
System.Boolean

BasicRatingLifeCycles

Number of revolutions which one of the bearing rings or washers makes in relation to the other ring or washer before the first evidence of fatigue develops in the material of one of the rings or washers or one of the rolling elements. Basic Rating Life is defined in ISO 281:2007 Sections 5-8. It does not include any life modification factors and so corresponds to a reliability of 10%.

Measurement: Cycles

Declaration

public double BasicRatingLifeCycles { get; }

Property Value

Type	Description
System.Double

BasicRatingLifeDamage

Proportion of the fatigue failure time that is experienced by the bearing i.e. 100% damage occurs at the time to fail. Basic Rating Life is defined in ISO 281:2007 Sections 5-8. It does not include any life modification factors and so corresponds to a reliability of 10%.

Measurement: Damage

Declaration

public double BasicRatingLifeDamage { get; }

Property Value

Type	Description
System.Double

BasicRatingLifeDamageRate

The rate of damage i.e. 1/time to fail. Basic Rating Life is defined in ISO 281:2007 Sections 5-8. It does not include any life modification factors and so corresponds to a reliability of 10%.

Measurement: DamageRate

Declaration

public double BasicRatingLifeDamageRate { get; }

Property Value

Type	Description
System.Double

BasicRatingLifeReliability

The reliability requirement that would give 100% damage for the bearing. Basic Rating Life is defined in ISO 281:2007 Sections 5-8. It does not include any life modification factors and so corresponds to a reliability of 10%.

Measurement: Percentage

Declaration

public double BasicRatingLifeReliability { get; }

Property Value

Type	Description
System.Double

BasicRatingLifeSafetyFactor

The allowable increase/decrease in load in order to get 100% damage. Calculated by converting the damage into a force relationship. Basic Rating Life is defined in ISO 281:2007 Sections 5-8. It does not include any life modification factors and so corresponds to a reliability of 10%.

Measurement: SafetyFactor

Declaration

public double BasicRatingLifeSafetyFactor { get; }

Property Value

Type	Description
System.Double

BasicRatingLifeTime

Time before the first evidence of fatigue develops in the material of one of the rings or washers or one of the rolling elements based on the current loading and speed. Basic Rating Life is defined in ISO 281:2007 Sections 5-8. It does not include any life modification factors and so corresponds to a reliability of 10%.

Measurement: Time

Declaration

public double BasicRatingLifeTime { get; }

Property Value

Type	Description
System.Double

BasicRatingLifeUnreliability

Failure rate for the bearing, i.e. 1 - Reliability. Basic Rating Life is defined in ISO 281:2007 Sections 5-8. It does not include any life modification factors and so corresponds to a reliability of 10%.

Measurement: Percentage

Declaration

public double BasicRatingLifeUnreliability { get; }

Property Value

Type	Description
System.Double

CalculatedViscosityRatio

This is the calculated viscosity ratio before any modification for EP Additives. See clause 9.3.3.3.4 of ISO 281:2007.

Declaration

public double CalculatedViscosityRatio { get; }

Property Value

Type	Description
System.Double

ContaminationFactor

Influences the life modification factor for systems approach. Calculated using Annex A of ISO 281:2007.

Declaration

public double ContaminationFactor { get; }

Property Value

Type	Description
System.Double

ContaminationFactorFromCalculatedViscosityRatio

This is the contamination factor calculated from the calculated viscosity ratio, i.e. where the viscosity ratio has not been modified for EP Additives. See clause 9.3.3.3.4 of ISO 281:2007. Influences the life modification factor for systems approach. Calculated using Annex A of ISO 281:2007.

Declaration

public double ContaminationFactorFromCalculatedViscosityRatio { get; }

Property Value

Type	Description
System.Double

DynamicAxialLoadFactor

The dynamic equivalent load in ISO 281:2007 is given by the dynamic radial load factor (X) times the radial load plus the dynamic axial load factor (Y) times the axial load.

Declaration

public double DynamicAxialLoadFactor { get; }

Property Value

Type	Description
System.Double

DynamicEquivalentLoad

Constant stationary radial or axial load (for radial or axial bearings) under the influence of which a rolling bearing would have the same life as it would attain under the actual load conditions.

Measurement: Force

Declaration

public double DynamicEquivalentLoad { get; }

Property Value

Type	Description
System.Double

DynamicRadialLoadFactor

The dynamic equivalent load in ISO 281:2007 is given by the dynamic radial load factor (X) times the radial load plus the dynamic axial load factor (Y) times the axial load.

Declaration

public double DynamicRadialLoadFactor { get; }

Property Value

Type	Description
System.Double

ELimitingValueForDynamicEquivalentLoad

The limiting value of the axial over the radial load for the applicability of different values of the dynamic radial and axial load factors. See ISO 281:2007.

Declaration

public double ELimitingValueForDynamicEquivalentLoad { get; }

Property Value

Type	Description
System.Double

LifeModificationFactorForSystemsApproach

Takes into account the variation in the life due to the influence of the fatigue stress of the steel, lubrication and contamination conditions and the surface roughness of the element and rings. Calculation of the factor is described in ISO 281:2007 Section 9.

Declaration

public double LifeModificationFactorForSystemsApproach { get; }

Property Value

Type	Description
System.Double

LifeModificationFactorForSystemsApproachWithCalculatedViscosityRatio

Takes into account the variation in the life due to the influence of the fatigue stress of the steel, lubrication and contamination conditions and the surface roughness of the element and rings. Calculation of the factor is described in ISO 281:2007 Section 9. This value is calculated using the original viscosity ratio before any improvement from the use of EP additives. See section 9.3.3.3.4.

Declaration

public double LifeModificationFactorForSystemsApproachWithCalculatedViscosityRatio { get; }

Property Value

Type	Description
System.Double

ModifiedRatingLifeCycles

Number of revolutions which one of the bearing rings or washers makes in relation to the other ring or washer before the first evidence of fatigue develops in the material of one of the rings or washers or one of the rolling elements. Modified Rating Life is defined in ISO 281:2007 Section 9. It includes the life modification factors for reliability and systems approach.

Measurement: Cycles

Declaration

public double ModifiedRatingLifeCycles { get; }

Property Value

Type	Description
System.Double

ModifiedRatingLifeDamage

Proportion of the fatigue failure time that is experienced by the bearing i.e. 100% damage occurs at the time to fail. Modified Rating Life is defined in ISO 281:2007 Section 9. It includes the life modification factors for reliability and systems approach.

Measurement: Damage

Declaration

public double ModifiedRatingLifeDamage { get; }

Property Value

Type	Description
System.Double

ModifiedRatingLifeDamageRate

The rate of damage i.e. 1/time to fail. Modified Rating Life is defined in ISO 281:2007 Section 9. It includes the life modification factors for reliability and systems approach.

Measurement: DamageRate

Declaration

public double ModifiedRatingLifeDamageRate { get; }

Property Value

Type	Description
System.Double

ModifiedRatingLifeReliability

The reliability requirement that would give 100% damage for the bearing. Modified Rating Life is defined in ISO 281:2007 Section 9. It includes the life modification factors for reliability and systems approach.

Measurement: Percentage

Declaration

public double ModifiedRatingLifeReliability { get; }

Property Value

Type	Description
System.Double

ModifiedRatingLifeSafetyFactor

The allowable increase/decrease in load in order to get 100% damage. Calculated by converting the damage into a force relationship. Modified Rating Life is defined in ISO 281:2007 Section 9. It includes the life modification factors for reliability and systems approach.

Measurement: SafetyFactor

Declaration

public double ModifiedRatingLifeSafetyFactor { get; }

Property Value

Type	Description
System.Double

ModifiedRatingLifeTime

Time before the first evidence of fatigue develops in the material of one of the rings or washers or one of the rolling elements based on the current loading and speed. Modified Rating Life is defined in ISO 281:2007 Section 9. It includes the life modification factors for reliability and systems approach.

Measurement: Time

Declaration

public double ModifiedRatingLifeTime { get; }

Property Value

Type	Description
System.Double

ModifiedRatingLifeUnreliability

Failure rate for the bearing, i.e. 1 - Reliability. Modified Rating Life is defined in ISO 281:2007 Section 9. It includes the life modification factors for reliability and systems approach.

Measurement: Percentage

Declaration

public double ModifiedRatingLifeUnreliability { get; }

Property Value

Type	Description
System.Double

ReferenceKinematicViscosity

According to equations (28) and (29) of ISO 281:2007

Measurement: KinematicViscosity

Declaration

public double ReferenceKinematicViscosity { get; }

Property Value

Type	Description
System.Double

ViscosityRatio

According to ISO 281:2007 a value of 1 shall be used if EP additives are used, when the calculated viscosity ratio is less than 1 and the calculated contamination factor is greater than or equal to 0.2

Declaration

public double ViscosityRatio { get; }

Property Value

Type	Description
System.Double

Implements

System.IEquatable<T>

Extension Methods

UtilityMethods.IsReadOnly<T>(T, Expression<Func<T, Object>>)

UtilityMethods.IsValid<T>(T, Expression<Func<T, Object>>)

UtilityMethods.IsMethodValid<T>(T, Expression<Func<T, Action>>)

UtilityMethods.IsMethodReadOnly<T>(T, Expression<Func<T, Action>>)