Class GearMeshResultsAtOffset
Implements
Inherited Members
Namespace: SMT.MastaAPI.SystemModel.AnalysesAndResults.SystemDeflections.Reporting
Assembly: SMT.MastaAPI.15.0.dll
Syntax
public sealed class GearMeshResultsAtOffset : APIBase, IEquatable<APIBase>Properties
ChangeInCentreDistance
Sum of the changes in centre distance of the two gears. A positive value indicates the gears have moved away from each other and a negative value that they have moved towards each other.
Measurement: VeryShortLength
Declaration
public double ChangeInCentreDistance { get; }Property Value
| Type | Description |
|---|---|
| System.Double |
Gears
Declaration
public ReadOnlyCollection<GearInMeshDeflectionResults> Gears { get; }Property Value
| Type | Description |
|---|---|
| System.Collections.ObjectModel.ReadOnlyCollection<GearInMeshDeflectionResults> |
InitialGapDueToBacklash
Initial gap in the normal direction due to the backlash. This does not include any change in backlash due to deflections.
Measurement: VeryShortLength
Declaration
public double InitialGapDueToBacklash { get; }Property Value
| Type | Description |
|---|---|
| System.Double |
MicroGeometryRelief
Change in the amount of material on the gear at this point. A negative value indicates removal of material and hence an increase in the gap. Defined in the transverse plane.
Measurement: VeryShortLength
Declaration
public double MicroGeometryRelief { get; }Property Value
| Type | Description |
|---|---|
| System.Double |
NormalDeflection
Deflection normal to the flank at mesh point as a result of the analysis.
Measurement: VeryShortLength
Declaration
public double NormalDeflection { get; }Property Value
| Type | Description |
|---|---|
| System.Double |
NormalForcePerUnitFaceWidth
Zero when not in contact. Integrating this over the face width will give the total normal force.
Measurement: ForcePerUnitLength
Declaration
public double NormalForcePerUnitFaceWidth { get; }Property Value
| Type | Description |
|---|---|
| System.Double |
NormalInterference
Sum of the deflection and the micro geometry relief to get the total interference change.
Measurement: VeryShortLength
Declaration
public double NormalInterference { get; }Property Value
| Type | Description |
|---|---|
| System.Double |
NormalStiffnessPerUnitFaceWidth
Zero when not in contact. Integrating this over the face width will give the total normal stiffness.
Measurement: StiffnessPerUnitFaceWidth
Declaration
public double NormalStiffnessPerUnitFaceWidth { get; }Property Value
| Type | Description |
|---|---|
| System.Double |
Offset
Measurement: ShortLength
Declaration
public double Offset { get; }Property Value
| Type | Description |
|---|---|
| System.Double |
OperatingBacklash
Backlash due to the change in centre distance at this position.
Measurement: VeryShortLength
Declaration
public double OperatingBacklash { get; }Property Value
| Type | Description |
|---|---|
| System.Double |
TransverseDeflection
Deflection in the transverse plane at mesh point as a result of the analysis.
Measurement: VeryShortLength
Declaration
public double TransverseDeflection { get; }Property Value
| Type | Description |
|---|---|
| System.Double |
TransverseInterference
Sum of the deflection and the micro geometry relief to get the total interference change.
Measurement: VeryShortLength
Declaration
public double TransverseInterference { get; }Property Value
| Type | Description |
|---|---|
| System.Double |